Originally posted at http://sam.bytebandits.com/radotutorial/ which is long gone, so posting my archived copy here for future owners.

Corrado G60: A/C Air Conditioning High Pressure Switch

Corrado G60: Fan and Fuel Pump Pressure After Run Sensor

Corrado G60: Alternators wires, output (large) and field (small)

Corrado G60: Blue Coolant Temperature Sensor

Corrado G60: CO Pot connector cleaning

Corrado G60: CO Pot Resistance (Ohms) Measuring

Corrado G60: CO Pot Seals - boost leak

Corrado G60: CO Pot adjusting - Air/Fuel Tuning Tool

Corrado G60: CO Pot closeup

Corrado G60: Plastic Coolant Flange Leak

Corrado G60: Blue Coolant Temperature Sensor - 180-210 Ohms @ 180F

Corrado G60: Crankcase Ventiliation Sensor

Corrado G60: Bosch Distributor RF Shield

Corrado G60: Corrado ECU Removal

Corrado G60: Fuel Pressure Regulator and hose connection

Corrado G60: Fresh Air Intake and seal

Corrado G60: Idle Air Adjustment Screw

Corrado G60: Idle Screw and cable/vac lines heat shield

Corrado G60: Throttle Idle Switch

Corrado G60: ISV (Idle Stabilization Valve). Faulty can result in erratic idle.

Corrado G60: Knock sensor

Corrado G60: Low Pressure Oil Sensor

Corrado G60: Tap on O2 Sensor Wire

Corrado G60: Oil Temperature Sensor for MFA display

Corrado G60: Oil Temperature and Pressure Sensors

Corrado G60: Throttle cable slack adjuster

Corrado G60: Bolt for adjusting distributor timing

Corrado G60: Handy wrench for adjusting distributor timing

Corrado G60: 13mm crows foot wrench

Corrado G60: Alternator Voltage Regulator

Corrado G60: WOT (Wide Open Throttle) Switch on throttle body/cable

Corrado G60: WOT Switch testing
Want to leave a comment or ask the owner a question?
Sign in or register a new account — it's free